1
00:00:05,540 --> 00:00:12,280
Hi there, welcome to my talk, Experimental Aviation Risks and Reward for the Aerospace Village DEFCON 28 Safe Mode.

2
00:00:12,400 --> 00:00:17,060
I decided to do this talk with a little bit lighter content than the stuff I did last year.

3
00:00:17,060 --> 00:00:26,460
Since those of us involved in security and variably are also involved with risk, I thought it would be interesting to kind of apply the risk model to some different perspectives.

4
00:00:26,460 --> 00:00:48,780
Since I'm building my own aircraft, I'll talk about some of the things that I learned, some of the decisions that you will have to undergo if you decide to actually get involved with building your own aircraft, and hopefully give you a new perspective on this particular segment of DII and being a maker of building your own airplane.

5
00:00:52,200 --> 00:00:54,480
So, again, my name is Patrick Kiley.

6
00:00:54,480 --> 00:00:57,680
I'm a member of the Penetration Testing Team at Rapid7.

7
00:00:57,780 --> 00:01:02,660
Previously, I've done research last year on avionic security.

8
00:01:02,720 --> 00:01:12,140
There's a talk that you can look up for last year's Aviation Village, before it became this year's Aerospace Village, where I talked about CAN bus and avionics.

9
00:01:12,380 --> 00:01:17,180
I've also done other research in internet-connected transportation platforms.

10
00:01:17,520 --> 00:01:24,120
I have experience in hardware hacking, Internet of Things, CAN bus quite a bit, and I'm building my own airplane.

11
00:01:25,920 --> 00:01:28,640
So here's kind of a quick overview of the agenda.

12
00:01:28,640 --> 00:01:34,360
We're going to talk about the FAA regulations very lightly and specifically this 51% rule.

13
00:01:34,400 --> 00:01:38,440
We'll talk about plans and kits, a little bit on quick builds as well.

14
00:01:38,880 --> 00:01:46,440
Composite versus riveted aluminum construction, you know, just kind of the construction materials that you can choose to build your airframe out of.

15
00:01:47,540 --> 00:01:57,800
A little treatise on making changes to tested designs, talk about engine selection, avionics, and then a little bit about the final steps after you've completed.

16
00:02:01,670 --> 00:02:08,490
So the FAA defines the language for what is permitted if you're going to build your own airplane.

17
00:02:08,490 --> 00:02:18,950
So certified aircraft have a ridiculous amount of regulations they have to comply with for safety to ensure, you know, consistency and everything else.

18
00:02:18,950 --> 00:02:22,350
And it's one of the reasons that makes certified aircraft so expensive.

19
00:02:23,770 --> 00:02:30,830
Experimental aircraft are not cheap by any means whatsoever, but they are a little bit more advantageous.

20
00:02:30,950 --> 00:02:48,010
The FAA defines the rules and federal aviation regulations 21.121 section G, and then they've got an advisory circulator that they did 20-27 where they clarify some additional stuff because of what some of the other manufacturers are starting to do.

21
00:02:48,490 --> 00:02:55,770
The biggest thing is you need to have proof, you know, you need proof that you actually, this was built by a person and not a company .

22
00:02:55,770 --> 00:03:07,030
So this is basically be taking pictures of your work, keeping a blog, keeping other records showing that you bought the components, that you put them together, something showing your progress.

23
00:03:07,290 --> 00:03:08,850
The work can be started by someone else.

24
00:03:08,850 --> 00:03:13,970
You can actually buy somebody else's amateur built kit and finish it yourself.

25
00:03:13,970 --> 00:03:26,190
Of course, you know, cabbie and emptor, you don't know what their skill set is, so you need to have someone who knows to kind of help review it and be able to actually examine the work up till then and see if it's sound.

26
00:03:26,910 --> 00:03:28,450
And then you can also have help.

27
00:03:28,450 --> 00:03:29,550
That's how quick builds work.

28
00:03:29,550 --> 00:03:40,210
There are a lot of programs where you can actually go to a factory and do most of the work and then you just have the instructors there to guide you so you actually comply with that 51% rule.

29
00:03:41,550 --> 00:03:43,210
A repairman's certificate is a little bit different.

30
00:03:43,210 --> 00:03:46,450
A repairman's certificate basically allows you to work on it after it's done.

31
00:03:46,630 --> 00:03:53,330
So, for example, you can work on the engine more and wouldn't have to hire an airframe and power plant mechanic.

32
00:03:53,330 --> 00:03:58,770
You can demonstrate you have the skill to do the work safely and successfully.

33
00:03:58,870 --> 00:04:00,610
That's what a repairman's certificate is.

34
00:04:00,610 --> 00:04:07,230
It's separate from the airworthiness certificate and it's a demonstration of the skill, not a demonstration of the work.

35
00:04:07,610 --> 00:04:12,230
And experimental aircraft have restrictions that don't apply to commercial aircraft.

36
00:04:12,230 --> 00:04:16,610
You cannot use an experimental aircraft in a for hire manner.

37
00:04:16,670 --> 00:04:21,710
But if you're just moving yourself and your family around and you're not charging for it, you're allowed to do that.

38
00:04:21,710 --> 00:04:27,210
You can basically use it for pleasure all pretty much within the limitations.

39
00:04:27,210 --> 00:04:38,190
When you get the airworthiness certificate, your airworthiness certificate is going to have its own set of limitations in it and it's going to be very clearly defined as to what you're not allowed to do with it.

40
00:04:38,410 --> 00:04:47,810
Beyond that, the topic is very complicated and I would just encourage you to do the research if you want to use an experimental aircraft in a particular manner.

41
00:04:48,050 --> 00:04:54,870
There's going to be someone who has actually tried and done it and the answer is going to be out there for you on the internet.

42
00:04:56,010 --> 00:04:59,310
So, why would you want to choose an experimental aircraft ?

43
00:04:59,570 --> 00:05:01,250
It can't be just because you want to fly.

44
00:05:01,250 --> 00:05:03,250
If you want to fly, you should just rent.

45
00:05:03,250 --> 00:05:06,290
There are many things in life that you should rent and not own.

46
00:05:06,610 --> 00:05:16,690
Aircraft is probably one of them, but if you want to fly something that's a little bit more higher performance and you're an engineering nut and like to build stuff, this might just be for you.

47
00:05:16,890 --> 00:05:19,570
You have to be able to tolerate a certain amount of risk.

48
00:05:19,750 --> 00:05:30,690
Building something that's normally done by professionals automatically inherits a specific amount of risk and you have to be willing to analyze that, see what it is, accept it.

49
00:05:30,910 --> 00:05:38,290
It's going to be probably the most complicated thing you've ever done because you're not just doing the airframe, you're doing the avionics, you're doing the engine.

50
00:05:38,670 --> 00:05:46,990
It's a lot of different disciplines mixed in together, but you can get a higher performance aircraft than you would be able to get for a specific dollar amount.

51
00:05:47,150 --> 00:05:51,790
The image that I have here of the Long Easy, it's a very high performing aircraft.

52
00:05:51,970 --> 00:05:53,870
It's also very reasonably priced.

53
00:05:53,870 --> 00:05:55,310
It's a two-seater tandem.

54
00:05:56,250 --> 00:06:04,970
One of my favorites is you'll kind of see later when you actually see that the kit that I chose to build, it's a very solid choice for an experimental aircraft.

55
00:06:06,210 --> 00:06:08,390
So how are you going to build it?

56
00:06:08,390 --> 00:06:10,090
There are a few different ways you can go about this.

57
00:06:10,090 --> 00:06:11,710
You can buy a set of plans.

58
00:06:11,710 --> 00:06:13,890
I actually have a set of plans here for my kit.

59
00:06:13,890 --> 00:06:15,990
This is a set of Cozy Plans.

60
00:06:15,990 --> 00:06:24,330
It's a very thick, bound, large bound manual that also comes with some very large format drawings.

61
00:06:24,610 --> 00:06:28,990
So this is some drawings of the instrument panel using conventional gauges.

62
00:06:29,490 --> 00:06:35,330
And then, you know, that's just one section or two sections of the plans that actually cover the whole thing.

63
00:06:35,930 --> 00:06:40,810
The other thing that you can do, and when you buy plans, you actually just source everything.

64
00:06:40,810 --> 00:06:43,370
You're going to buy all the components.

65
00:06:43,370 --> 00:06:48,410
For example, this one, it's going to be all the fiberglass, all the epoxy, all the individual metal components.

66
00:06:48,410 --> 00:06:55,270
You're going to buy the engine, the airframe, the avionics, and you're going to build the airframe from scratch using just plans.

67
00:06:55,570 --> 00:06:57,210
It's the least expensive option.

68
00:06:57,210 --> 00:06:58,690
It's also the most time consuming.

69
00:06:59,490 --> 00:07:06,950
The way kits work is you purchase the plans and partially completed parts, enough to qualify for the 51% rule.

70
00:07:06,950 --> 00:07:15,230
They have some quick builds where a lot of the stuff is done for you, but you still have to finish it, and it greatly decreases the amount of time that you spend on it.

71
00:07:15,230 --> 00:07:18,330
But you also increase the cost.

72
00:07:18,330 --> 00:07:21,430
The picture I have here is actually from Sun and Fun 2017.

73
00:07:21,470 --> 00:07:22,910
It's a Velocity Twin.

74
00:07:22,910 --> 00:07:33,370
It's a gorgeous aircraft, very high performing, beautiful inside, canard design, which you can kind of see my preference towards those already.

75
00:07:33,610 --> 00:07:44,770
And then there's another thing called builder assistance programs, where you actually go to the manufacturer and they help you along the way, but ensure that you're actually doing enough to qualify for 51% of the work.

76
00:07:47,450 --> 00:07:48,670
And then there's different materials.

77
00:07:48,670 --> 00:07:57,990
So if you're going to build an aircraft, if you want just something low and slow, or maybe a small and single seat airbag, the Fabric Overwood is perfectly valid.

78
00:07:58,130 --> 00:07:59,870
The very first aircraft were made from these.

79
00:07:59,870 --> 00:08:08,770
You might have some just aluminum tubes, aluminum spars, and the rest of it's going to be wood.

80
00:08:09,390 --> 00:08:11,270
It also can be very lightweight.

81
00:08:11,770 --> 00:08:13,870
And then you cover that with a doped fabric.

82
00:08:13,870 --> 00:08:23,770
It's a special type of fabric that's coated in epoxy to make it very rigid, relatively easy compared to the other techniques, inexpensive.

83
00:08:23,970 --> 00:08:26,250
This was just a gorgeous one that I saw at Sun and Fun.

84
00:08:26,250 --> 00:08:30,410
I'm not even sure if it's fabric covered, but it's the type of aircraft that you'll see.

85
00:08:31,690 --> 00:08:36,890
Probably the most popular style out there, the one that has the most examples flying, is riveted aluminum.

86
00:08:36,890 --> 00:08:44,570
The Vans RV line of aircraft are all riveted aluminum, maybe with some composite components that you add here and there.

87
00:08:45,550 --> 00:08:50,570
And that's how, for the majority of aircraft history, aircraft were built.

88
00:08:50,570 --> 00:08:53,930
It was aluminum that was all held together by rivets.

89
00:08:54,250 --> 00:09:00,290
You have to be comfortable banging rivets, working with blind rivets, but it's very strong and light.

90
00:09:01,030 --> 00:09:10,850
It was only recently that aircraft construction moved towards composite, but you'll still see a lot of riveted construction out there for existing airframes.

91
00:09:11,330 --> 00:09:13,650
And now we get to my favorite composite.

92
00:09:13,690 --> 00:09:20,270
So this is what I chose, fiberglass and epoxy, or carbon fiber and epoxy.

93
00:09:20,270 --> 00:09:24,050
You can see a beautiful carbon fiber airfoil here.

94
00:09:26,210 --> 00:09:27,590
What is composite?

95
00:09:27,590 --> 00:09:34,670
So really, anytime you combine two materials, and when those two materials are combined, they form a stronger material, you get a composite.

96
00:09:34,690 --> 00:09:40,930
Concrete is a composite material because you have your aggregate, your sand, and your cement, and you get concrete.

97
00:09:40,930 --> 00:09:47,390
Sometimes, you know, with your reinforcing structures like rebar or other structures added to it, but it's still a composite.

98
00:09:47,810 --> 00:09:50,490
So fiberglass by itself is not a composite.

99
00:09:50,490 --> 00:09:54,090
Fiberglass, when it's bonded with epoxy, is a composite.

100
00:09:54,090 --> 00:10:05,490
Carbon fiber and Kevlar, not the bulletproof Kevlar, but an abrasion-resistant Kevlar, are also a couple of other fabric materials that can be used in composite construction.

101
00:10:06,090 --> 00:10:10,990
In fact, newer aircraft like the Dreamliners, all composite construction.

102
00:10:12,450 --> 00:10:20,030
777X uses composite wings and then conventionally fabricated fuselage.

103
00:10:21,370 --> 00:10:27,130
So what I chose, the Burt Rutan design, this is a little bit about those, my favorites.

104
00:10:27,450 --> 00:10:30,210
He pioneered moldless composite construction.

105
00:10:30,210 --> 00:10:35,650
So it's a method of fabricating fiberglass parts without a mold.

106
00:10:36,210 --> 00:10:41,690
You take a section of foam, and I have an example right here.

107
00:10:41,990 --> 00:10:47,590
So for this image, this is a section that was actually removed from the aircraft in a building.

108
00:10:47,590 --> 00:11:07,070
You can see you have your fiberglass and epoxy layer, but beyond it you have sandwiched types of foam and they're held together with micro bubbles mixed in with epoxy to bond both the fiberglass to the first layer of foam and then the second layer of foam together.

109
00:11:07,070 --> 00:11:10,890
And what you do is on this other side, you're eventually going to get foam on this.

110
00:11:10,890 --> 00:11:12,790
Not for this, this is a discard piece.

111
00:11:13,670 --> 00:11:21,190
And between the two, by having this space separated by the two separate skins of fiberglass, you get much stronger construction.

112
00:11:21,510 --> 00:11:29,150
And you can basically take those shapes, you can lay them out, and then you lay the fiberglass on top of it into its final design.

113
00:11:29,310 --> 00:11:36,570
That was what Burt Rutan successfully did in his very easy and his long easy, and he turned that into scaled composites.

114
00:11:36,670 --> 00:11:39,410
And it now is going into space with that design.

115
00:11:39,410 --> 00:11:47,570
He just did Voyager, the aircraft that flew around the world without stopping, and many of his other brilliant designs.

116
00:11:47,570 --> 00:11:49,610
He was a big advocate of the canard.

117
00:11:49,610 --> 00:11:57,490
I think some of the the work has gone away from that, but I'll kind of go into what a canard is in the next slide.

118
00:11:57,490 --> 00:12:00,430
But most of his designs were canard based.

119
00:12:00,510 --> 00:12:02,390
Canards are very resistant to stalls.

120
00:12:02,390 --> 00:12:10,550
You still have to follow weight and balance, and you always have to ensure that it's far enough forward so that the canard stalls first.

121
00:12:10,550 --> 00:12:15,870
But a canard adds from lift instead of subtracting from it, as I'll kind of show you in the next image.

122
00:12:15,870 --> 00:12:17,370
This is all from Bold Method.

123
00:12:17,850 --> 00:12:21,590
In a canard designed aircraft, the canard always must stall first.

124
00:12:21,590 --> 00:12:31,410
If the main wing stalls first, you're going to enter into a situation called a deep stall, but it's a relatively easy thing to avoid as long as you follow weight and balance, which you're supposed to do every time you fly anyway.

125
00:12:31,830 --> 00:12:33,670
You'll never get into that situation.

126
00:12:34,130 --> 00:12:44,930
So a traditional, conventionally designed aircraft, you have your horizontal stabilizer that provides a vector of force opposite that of the wing.

127
00:12:44,930 --> 00:12:54,890
So it's providing, in this image, 250 pounds of negative lift that counteracts the 2250 pounds of positive lift.

128
00:12:55,870 --> 00:13:01,010
And then in a neutral situation, you have 2000 pounds of weight, you know, in this particular configuration.

129
00:13:01,030 --> 00:13:06,450
In a canard, the idea is that it's more efficient because both surfaces are providing lift.

130
00:13:06,450 --> 00:13:13,810
Both surfaces are providing a positive amount of lift to counteract the weight of the aircraft.

131
00:13:16,170 --> 00:13:27,210
Again, all this composite picture of the skin I just showed you, where you basically have a very thin layer of fiberglass embedded with epoxy.

132
00:13:27,530 --> 00:13:30,730
It's actually a very friendly method to get into.

133
00:13:31,270 --> 00:13:38,490
Both the aluminum and the epoxy kits, they have what are called kind of like builder's confidence kits.

134
00:13:38,490 --> 00:13:45,470
You're like, I'm not going to spend $10,000 on a set of components just to see that this is really not for me.

135
00:13:45,470 --> 00:13:52,810
So you can spend just a little bit and they'll give you some epoxy, some fiberglass, and some foam and you do it.

136
00:13:52,810 --> 00:13:58,810
You actually go through several steps to show that this is actually something that you're capable of.

137
00:13:59,010 --> 00:14:10,990
In this other image, we actually have a canard style wing that's for a COSY that's actually up on a jig before it has the fiberglass applied to it.

138
00:14:14,270 --> 00:14:20,830
So this is where I got into the selection for the plans that I eventually chose.

139
00:14:21,170 --> 00:14:27,770
So Bert Rutan designed the very easy and then he does design the long easy as a ground-up redesign of that.

140
00:14:27,770 --> 00:14:30,550
Long easy is a two-seat tandem aircraft.

141
00:14:30,750 --> 00:14:34,850
These pictures are from Sun and Fun 2017 when I took them.

142
00:14:35,410 --> 00:14:40,650
And then the picture you see here is that of an air canard that's still in partial primer.

143
00:14:41,130 --> 00:14:45,450
I was really interested in this one because it's the design that I originally chose to go with.

144
00:14:45,470 --> 00:14:51,650
And eventually I actually licensed the set of COSY plans as well because I just wanted to make sure everything was covered.

145
00:14:51,650 --> 00:15:00,630
There was some disagreement between Nat Puffer and the guy that designed the air canard, which is a slightly roomier version of the COSY.

146
00:15:00,630 --> 00:15:08,530
So just to avoid any possible issues in design, I wanted to have both set of plans because they're reasonably inexpensive.

147
00:15:08,750 --> 00:15:14,650
And I could actually decide that if something didn't give me a clear image, I figured the other set of plans would.

148
00:15:18,380 --> 00:15:21,620
So here's the little blurb about making changes.

149
00:15:21,620 --> 00:15:31,720
One of the biggest things I learned about from just looking in the forums, talking to people, is that any changes that you want to make can have unintended consequences.

150
00:15:32,200 --> 00:15:39,340
One of the earliest things I learned is like, you know, why wouldn't you not take the fiberglass and use carbon fiber?

151
00:15:39,340 --> 00:15:41,020
It's reasonably cheap now.

152
00:15:41,160 --> 00:15:48,760
Well, you're really not going to save a whole lot of weight, but you are going to introduce completely different moments of elasticity.

153
00:15:49,340 --> 00:15:58,440
You could actually add some vibration elements that could cause something to shear and cause something to fail and not anticipate it.

154
00:16:00,100 --> 00:16:09,680
The other big line that I heard was basically, you know, from your aircrafts actually end up being lighter because you're not going to be able to afford any avionics to put in it for after all the money you spent on the carbon fiber.

155
00:16:09,680 --> 00:16:11,760
So you'll end up with a lighter aircraft that way.

156
00:16:14,380 --> 00:16:20,540
It's pretty interesting when you actually dig into it and see that, you know, maybe not carbon fiber is the best choice for all aircraft.

157
00:16:20,540 --> 00:16:23,280
There are aircraft that were designed around carbon fiber.

158
00:16:23,280 --> 00:16:35,300
The Burkut, which is a fast and slick version of the Long EZ, is a carbon fiber variant, but it was designed from the ground up to have the amount of carbon fiber necessary that it has for it.

159
00:16:36,180 --> 00:16:38,620
And then this is kind of a famous line from a plan.

160
00:16:38,620 --> 00:16:42,000
If you want to put something in your airplane, first throw it up in the air.

161
00:16:42,000 --> 00:16:43,860
If it comes down, it doesn't belong in the airplane.

162
00:16:44,060 --> 00:16:47,540
The designer of this was very minimalist in what he designed.

163
00:16:47,540 --> 00:16:50,060
He wanted this aircraft to go without a battery.

164
00:16:50,640 --> 00:16:53,840
He wanted to go without a starter using just a prop start.

165
00:16:53,860 --> 00:16:56,000
Most people have chosen not to do that.

166
00:16:56,920 --> 00:17:02,120
There are other issues and risks when you deal with hand cranking a prop.

167
00:17:02,820 --> 00:17:12,720
You know, all it takes is a little slip of the foot and now all of a sudden you're, you know, like the bad guy in Indiana Jones with a big fat spinning piece of metal right in your face.

168
00:17:12,880 --> 00:17:14,700
So, no thank you.

169
00:17:14,700 --> 00:17:17,740
I'll pay the weight penalty and deal with the starter.

170
00:17:17,740 --> 00:17:21,260
And then with glass panel cockpits, you need to have a backup battery source.

171
00:17:21,260 --> 00:17:22,600
You need to have a power source.

172
00:17:22,820 --> 00:17:24,780
And if you're going to have a starter, you have to have a battery.

173
00:17:25,200 --> 00:17:31,020
But it just goes to show that, you know, you really need to be careful when you're actually considering making changes.

174
00:17:31,280 --> 00:17:32,520
Is this going to add weight?

175
00:17:32,520 --> 00:17:34,180
Is this going to change the wing loading?

176
00:17:34,180 --> 00:17:37,600
Is this going to significantly change the performance characteristics of the aircraft?

177
00:17:37,860 --> 00:17:41,660
And here's really a case study in this next example.

178
00:17:41,980 --> 00:17:46,260
The unfortunate accident that took John Denver's life.

179
00:17:46,260 --> 00:17:48,640
John Denver was flying along easy.

180
00:17:48,660 --> 00:18:12,160
The NTSB actually found that the probable cause of that accident was the designer decided to take the fuel selector valve and instead of it being in front in the area where it's easily reachable by the pilot, he relocated the fuel valve to be closer to the fuel source.

181
00:18:12,460 --> 00:18:20,740
But what that actually did is when you actually have to select it, you have to reach over your shoulder because of the, you know, just you're kind of confined in.

182
00:18:20,740 --> 00:18:24,360
So you actually have to do this maneuver to change the fuel valve.

183
00:18:24,360 --> 00:18:37,160
And then when he was doing that, they say he probably unintentionally put control pressure on the rudder, causing a loss of control, causing him to fly into Monterey Bay, taking his life.

184
00:18:37,300 --> 00:18:44,740
So just the thought, the designer, it's thought relocated the fuel valve to make the fuel line shorter.

185
00:18:44,740 --> 00:18:53,700
By having shorter fuel lines, there could be less risk of a fuel leak, but introduced other elements that were not necessarily reconsidered from the fuel valve being up front.

186
00:18:53,700 --> 00:18:58,600
So in a long easy, the fuel tanks are behind you, the engine is behind you.

187
00:18:58,600 --> 00:19:02,200
So the thought was let's put the fuel selector behind you as well.

188
00:19:02,220 --> 00:19:04,000
Maybe not the best idea.

189
00:19:04,000 --> 00:19:17,760
It's a perfect example of the unintended consequences that you can have from actually making changes and why you really need to take a risk-based approach to any possible changes than what the designers actually intended on this.

190
00:19:17,760 --> 00:19:21,160
Because an experimental aircraft is inherently a risky activity.

191
00:19:23,060 --> 00:19:25,640
That was a little section about engine selection.

192
00:19:25,640 --> 00:19:39,220
So when I was getting into this, I was debating did I want to spend tens of thousands of dollars on an engine that was effectively a 50-year-old design?

193
00:19:39,220 --> 00:19:40,220
And that's what they all are.

194
00:19:40,220 --> 00:19:45,360
All of the air-cooled engines out there are really based on old, old technology.

195
00:19:45,360 --> 00:19:46,020
Pardon me.

196
00:19:49,040 --> 00:19:51,140
But they're designed for the purpose where they're used.

197
00:19:51,580 --> 00:20:06,540
But the thing I quickly learned is that the problem you run into with automotive conversions is, and the Subaru is a big popular one because it's kind of the same horizontally flat plane opposed engine, you have all the cooling issues.

198
00:20:06,540 --> 00:20:10,460
You have to introduce some type of cooling system, now you have a radiator, you have additional weight.

199
00:20:10,560 --> 00:20:19,680
You have to put in a reducing gearbox to slow the engine speed down to the appropriate speed for a propeller.

200
00:20:20,040 --> 00:20:24,300
That adds additional weight, adds additional complexity, additional points of failure.

201
00:20:24,900 --> 00:20:27,100
And then you have to deal with the fuel injection system.

202
00:20:27,100 --> 00:20:32,660
A fuel injection system that if you're using the automotive ECU, you may end up going to limp mode.

203
00:20:32,680 --> 00:20:35,500
And when you're in a car, you can just pull over.

204
00:20:35,600 --> 00:20:39,000
In an aircraft, you have to find a place to land immediately if you lose power.

205
00:20:39,040 --> 00:20:42,920
It can introduce an element of danger that's unexpected.

206
00:20:42,920 --> 00:20:45,760
And what I discovered is they ended up not being cheaper.

207
00:20:45,760 --> 00:20:51,640
They ended up being heavier, more complicated, more prone to more things that can go wrong.

208
00:20:52,200 --> 00:20:55,900
And because of all the changes you have to make there, they end up not being any cheaper.

209
00:20:56,520 --> 00:20:58,980
So that leaves us with conventional engines.

210
00:20:58,980 --> 00:21:04,960
Okay, you can do a turbine, but if you have that kind of money, you're going to be getting a super high performance something anyway.

211
00:21:05,400 --> 00:21:11,320
So conventional engines, they are lightweight, they're expensive for what you get.

212
00:21:11,320 --> 00:21:16,860
They are just look up IO 360 new and you'll see what I mean.

213
00:21:17,000 --> 00:21:24,600
Not to mention things like an IO 540 or IO 540 turbo, you know, turbo normalized or, you know, some of the other fancier ones.

214
00:21:24,600 --> 00:21:28,740
And imagine if you had an aircraft that had two of these, which you'd have to pay for to replace them in.

215
00:21:30,740 --> 00:21:32,860
So there are experimental options.

216
00:21:32,860 --> 00:21:41,720
What that basically means, it hasn't gone through the exact same certification process because the certification process itself is expensive, but yet you get the same quality.

217
00:21:41,720 --> 00:21:56,880
So you can get an experimental version of these engines that have the same quality for a much more reasonable price than buying something else that would be kind of in the certificated realm.

218
00:21:58,100 --> 00:22:00,900
All right, avionics, one of my favorite subjects.

219
00:22:01,640 --> 00:22:08,900
So when most of these designs came out, all you had choices were like, you know, your little round steam gauges, as they call them.

220
00:22:09,160 --> 00:22:24,400
You have your individual airspeed indicator, your horizontal situation indicator, you know, your compass, your turn and slip, vertical speed, altimeter, all of your, you know, attitude indicator, all separate designs.

221
00:22:25,020 --> 00:22:33,580
In a glass panel, you combine all that with a moving map, with GPS, all your controls in a centralized point, but you're also introducing a central point of failure.

222
00:22:33,580 --> 00:22:36,800
So you need to have some additional plans for that.

223
00:22:37,220 --> 00:22:41,480
But glass panel avionics are getting cheaper all the time.

224
00:22:41,480 --> 00:22:46,960
They're some of my favorite things to mess with for those of you who've studied the previous research that I've done.

225
00:22:47,240 --> 00:22:48,420
I think they're safer.

226
00:22:48,420 --> 00:22:50,860
I think they provide you better situational awareness.

227
00:22:51,460 --> 00:22:59,760
Even in, you know, darkness, you're going to be able to see the terrain in front of you if you have a more recent system.

228
00:22:59,940 --> 00:23:03,940
So you're going to be able to see that because it's going to have the terrain database loaded into it.

229
00:23:03,940 --> 00:23:10,020
You're going to see that there's an antenna tower loaded and I have to refer down to a sectional chart and manually de-conflict.

230
00:23:10,020 --> 00:23:14,020
The aircraft is going to tell you that there's an issue coming up.

231
00:23:14,520 --> 00:23:20,960
All your approach procedures are going to be built into a database within the avionics.

232
00:23:21,300 --> 00:23:24,560
But what I feel that these need are some backup gauges.

233
00:23:24,560 --> 00:23:41,140
Now they have electronic backup gauges, but why not look for something that is reasonable and inexpensive and just use a couple of must-have backup instruments as your backups next to your steam gauges.

234
00:23:41,140 --> 00:23:42,840
I think that's the best way to go.

235
00:23:44,740 --> 00:23:48,780
All right, so a little blurb on avionics cost.

236
00:23:48,840 --> 00:23:52,380
And we're going to take the Garmin G3X for example.

237
00:23:53,000 --> 00:23:58,880
They make certified and experimental versions of the exact same display running the same firmware.

238
00:23:59,620 --> 00:24:04,860
Just it's been blessed by the FAA and received certification approval.

239
00:24:05,480 --> 00:24:08,320
$99.95 for just the display.

240
00:24:08,320 --> 00:24:21,800
That's without any of the instruments, without your magnetometer, without your airspeed sensors, your various electronic gyros, any of your engine instruments.

241
00:24:21,800 --> 00:24:24,420
$10,000 just for the display.

242
00:24:24,420 --> 00:24:28,120
Whereas the exact same experimental display is $3,895.

243
00:24:28,460 --> 00:24:32,360
So my opinion, best choice in avionics.

244
00:24:32,360 --> 00:24:37,000
What I like, the ones that I've actually displayed them for and they're not mine.

245
00:24:37,000 --> 00:24:38,500
I've just done research on them.

246
00:24:38,500 --> 00:24:43,800
But experimental glass with a emergency backup steam gauges is a great combination.

247
00:24:45,740 --> 00:24:50,920
Okay, so now that you've done this, you've actually built your aircraft, what's the next step?

248
00:24:50,920 --> 00:24:54,100
You have to get a special airworthiness certificate.

249
00:24:54,100 --> 00:25:08,660
So what you do is you work with what's called a DAR and you have it inspected and you get an airworthiness certificate that tells you you have to fly for 25 to 40 hours in a restricted area away from population.

250
00:25:08,660 --> 00:25:13,180
You have fly out of a special airport that's away from everyone else.

251
00:25:14,420 --> 00:25:24,480
And you have to basically fly off the number of hours to show that this aircraft is worthy to be operated on the same runways and areas that other aircraft operate.

252
00:25:24,840 --> 00:25:28,120
And if you DIY this, you effectively you are a test pilot.

253
00:25:28,740 --> 00:25:30,960
But there are people that you can hire for this.

254
00:25:30,960 --> 00:25:36,960
If you are not, you know, this is a level of risk that you don't necessarily want to undertake.

255
00:25:36,960 --> 00:25:43,400
There are people that you can hire that love to do this all the time that are very skilled, especially maybe for your particular airframe.

256
00:25:43,960 --> 00:25:46,900
But effectively what you have to do is you have to build a test plan.

257
00:25:46,900 --> 00:25:48,380
Same thing that test pilots would do.

258
00:25:48,380 --> 00:25:51,360
So the first thing you do is you fire up the engine, you test everything.

259
00:25:51,740 --> 00:25:55,680
Then you taxi around in a little bit, shut everything down, inspect everything.

260
00:25:56,500 --> 00:26:02,460
Then you undergo high speed taxi testing where you actually get almost up to flight speeds and then slow back down again.

261
00:26:03,020 --> 00:26:04,760
And then you have your first flight.

262
00:26:05,060 --> 00:26:10,620
And the biggest things I see in the plan sections are when you do this, you need to wear a parachute.

263
00:26:11,480 --> 00:26:25,600
I guess that assumes you need to have taken skydiving classes, but I guess any parachutes better than any parachute, even if you haven't been through this stuff, is better than not wearing one if you need to get out because you've gotten into an uncontrollable situation.

264
00:26:27,180 --> 00:26:30,520
But this is kind of like probably one of the most risky areas of flight.

265
00:26:30,520 --> 00:26:38,380
It's where a lot of the accidents happen because something was tinkered with, there were unintended consequences, and that's where disaster struck.

266
00:26:40,840 --> 00:26:41,920
So thank you.

267
00:26:41,920 --> 00:26:45,200
I think we're gonna have some Q&A after this, so we'll cut over to that.

268
00:26:45,200 --> 00:26:47,760
And please feel free, I look forward to your questions.

269
00:26:47,760 --> 00:26:49,420
Thank you for listening to my talk.